Update: The CPD has been eliminated from the JCIDS process

The Capability Production Document (CPD) captures the information necessary to support production, testing, and deployment of an affordable and supportable increment within an acquisition strategy. The CPD identifies, in threshold/objective format, the specific attributes that contribute most significantly to the desired operational capability. The CPD is prepared during the Engineering & Manufacturing Development (EMD) Phase to guide the Production and Deployment phase after the Critical Design Review (CDR) and is used to measure the contractor’s delivery. The CPD is required for the Milestone C Review and must be certified prior to a program proceeding into the Production and Development (PD) Phase.

 Figure: CPD in the Acquisition/JCIDS Process

The CPD addresses the production elements specific to a single increment of an Evolutionary Acquisition program.  The refinement of performance attributes and Key Performance Parameters (KPPs) is the most significant difference between the Capability Development Document (CDD) and CPD.  A program with multiple increments will have a CPD for each increment.

JCIDS Manual required CPD Format:

1. Executive Summary
2. Capability Discussion
3. Analysis Summary
4. CONOPS Summary
5. Threat Summary
6. Program Summary
7. System Capabilities Required for the Current Increment
   • Key Performance Parameters
   • Thresholds
   • Objectives
8. FoS and SoS Synchronization
9. IT and NSS Supportability
10. E3 and Spectrum Supportability
11. Technology Manufacturing Readiness Assessment
12. Assets Required to Achieve Full Operational Capability (FOC)
13. Schedule and Initial Operational Capability (IOC) and FOC Definitions
14. Other DOTMLPF and Policy Considerations
15. Other System Attributes
16. Program Affordability

The Capability Development Tracking and Management (CDTM) tool is provided as a means to generate and submit ICDs, CDDs, CPDs, and Joint DCRs to the Knowledge Management/Decision Support (KM/DS) system.

REGULATORY: If there are no changes, a revalidated CDD may satisfy this information requirement. An equivalent DoD Component-validated requirements document will satisfy this requirement for certain information systems; the equivalent documents are finalized after Milestone B, to support deployment. [1]

•  See Requirements Document Sequence

AcqTips:

• The format for the CPD is found at Appendix A to Enclosure G of Manual for the Operation of the Joint Capabilities Integration and Development System.
• The CPD replaced the Operational Requirements Document (ORD) update (that was used for the Production Decision) under the old Requirements Generation System.

AcqLinks and References:

• CJCS Instruction 5123.01 “Charter Joint Requirements Oversight Council (JROC) and Implementation of the Joint Capabilities Integration and Development System (JCIDS)”
• Manual for the Operations of the Joint Capabilities Integration and Development System (JCIDS)
• [1] DoD Instruction 5000.02 “Operation of the Defense Acquisition System”
• JCIDS Process Flow Chart
• TRADOC CPD Writers Guide 
• CPD Lessons Summary

Updated: 2/12/2020